3L SERIES DEADBOLT
3L7RD2 (Vertical Only)
Operation
Deadbolt locked and unlocked by key. Must be locked by key after door is closed. Key may be withdrawn in locked position and unlocked position.
Specifications
Material– Bolt is stainless steel, springs are phosphor bronze, all other parts are brass.
ANSI/BHMA– Conforms to requirements of ANSI/BHMA A156.11, Grade 1
Backset– 7/8"
Bolt– 1 1/8" x 3/16" – 3/4" throw
Case– Height 1 21/32", width 2 1/8", thickness 21/32", hole spacing 1 39/64" x 1 1/4"
Cylinder diameter– 1 1/8"
Cylinder length– 7-pin tumbler, 1 13/64
Finish– Base finish 606 unless otherwise specified.
Keeper plate– None supplied.
Products protected by one or more of the following patents:
U.S.: 4531390; 4531389; 4633690; 4663839; 4075878; 4616394; 4055973; 4768360; D290085; 4722204; 4843852
Canada: 1229234
HOW TO ORDER 3L
5L SERIES LATCHBOLT
Specificaions
Latchbolt function– Retracted by key to unlock. Key may be with drawn only in locked position
Deadbolt function– Locked and unlocked by key. Must be locked by key after door is closed. Key may be withdrawn in locked position and unlocked position
ANSI/BHMA– Conforms to requirements of ANSI/BHMA A156.11, Grade 2
Backset– 7⁄8"
Body thickness– 1⁄2"
Case– Length 2 1⁄8", width 2 19⁄32", thickness 21⁄32", hole spacing 2 3⁄16"
Cylinder diameter– 1 1⁄8"
Cylinder length– 1 1⁄16"
Deadbolt– 3⁄4" x 25⁄64" – 1⁄2" throw
Door thickness– 5⁄8" minimum for rim type, 21⁄32" minimum for mortise type.
Face– 1 7⁄8" x 21⁄32"
Latchbolt– 3⁄4" x 25⁄64" – 9⁄32" throw
Material– Nickel plated zinc case and bolts, stainless steel cover, phosphor bronze spring.
Strike plate– 3⁄64" x 11⁄16" x 1 7⁄8", hole spacing 1 7⁄16", 1 1⁄4" wide lip.
T-Option– Key is removeable only in locked position. (Deadbolt Only)
5L SERIES LATCHBOLT
Mounting Positions
5L SERIES DEADBOLT
Mounting Positions
5L STRIKES
Strike plate specification: 3⁄64" x 11⁄16" x 1 7⁄8"; hole spacing 1 7⁄16"
HOW TO ORDER 5L
8L SERIES MAIL BOX LOCKS
8L7SPR Series
The 8L7SPR mail box lock features the convenience of the interchangeable core, allowing quick combination change, and is adaptable to a number of different mail box manufacturers. The 8L7SPR can be masterkeyed into any existing BEST system. Variations are available for adaptation purposes.
To order: Specify mail box manufacturer and style number, and/or send sample of mail box door.
Specifications
Housing– Steel, zinc plated.
Cylinder– Machined from solid aluminum.
Cylinder head diameter– 1 1/8".
Latchbolt– 9/32" square with bevel.
Handing– Right-hand standard – 8LSPR.
Finish– 627 standard.
1E SERIES-SLABBED CABINET MORTISE CYLINDERS
Specifications
Length– 1E7D4: 1 15/32" from head to cam.
1E7E4: 1 1/4" from head to cam.
Cylinder diameter– 1 5/32", 7/8" across flats.
Thread– 1.150 - 32 (NS - 2A).
Finish– 626 standard.
The special cylinders are threaded to the head, mounted with a hex nut, and slabbed on both sides to prevent turning in the mounting hole.
1E7D4
Direct motion cam prevents key from being withdrawn in unlocked position. Reversible cam may be assembled for required hand at installation.
1E7E4
270° lost motion cam permits key to be withdrawn when locked or unlocked.
HOW TO ORDER 1E
5E SERIES 3/4" UTILITY CYLINDER
5E Specifications:
5E6 – Series
“A” (Body length)– 31/32", Body diameter– 3/4", Body– 6 pin, Head diameter– 7/8", Finish – 626,
“B” (Max. mounting thickness)– 11/16"
5E7 - Series
“A” (Body length)– 1 1/8", Body diameter– 3/4", Body– 7 pin, Head diameter– 7/8", Finish– 626,
“B” (Max. mounting thickness)–27/32"
5E– Straight Cam
Standard 5E Assembly unit includes: Keyed 3⁄4" with cam (specify cam length - if length is not specified, the 5EC1 x 7⁄8" will be supplied as standard), hex nut, spacer collar (not supplied unless length is specified), and lock washer.
Application: Fits standard 3⁄4" cylinder installations for e.g. desks, file cabinets, coin-operated vending machines, utility cabinets, storage cabinets, elevators,and security alarm control panels.
Material finish: Solid extruded brass cylinder body, 626 finish standard.
Cam motion operation:
TYPE “A” - Standard 5E cylinder key rotates 360° right or left.
TYPE “B” - Limited motion cam operation 90° or 180° as required.
TYPE “C” - Lost motion cam operation 90°: Key removal with cam in locked or unlocked position.
TYPE “D” - Throw member-type drive. Two throw pins engage key plug from rear of cylinder. (Direct 360° action-R or L.) Throw member types available upon request.
Cam & Spacer Collar: Cam variations are detailed in the cylinder catalog section and may be modified for use on the 5E cylinder. Standard cams are factory attached to key plug with screws. Spacer collars may be required to position the cam for proper lock operation. The spacer collar is installed between the 5E cylinder head and the mounting surface. Both straight collars and special tapered collars available by request.
To order: See E series (cylinder) catalog section (page 11).
HOW TO ORDER 5E
2P SERIES PUSH LOCKS FOR FILE CABINETS
Specifications
Material– All parts are solid brass; phosphor bronze springs.
Dimensions– See illustrations and table below.
Finish– 2P Series 626 (satin chrome) standard finish. 5P series finish to match satin chrome. (7 pin only).
Two types of file cabinet push locks are available from BEST. The 2P series incorporates the BEST interchangeable core and requires special cabinet preparation. The 5P series replaces standard industry size file cabinet locks without modification of lock opening, but does not have interchangeable core features. Both may be keyed individually, keyed alike, masterkeyed or grand-masterkeyed with other BEST locks of any type. To order: Specify proper lock, finish and keying instructions.
2P Series Specifications
PATENTED KEYING
BEST Peaks®– For advanced solutions in key control and security, BEST offers Peaks®, the most adaptable and cost effective patented keying system on the market. The patented mechanism ensures that cylinders and cores will only operate with the Peaks® keys, which are only available through authorized BEST distributors.
For BEST products, Peaks® offers the security and convenience of a patented solution for interchangeable core. Peaks® is also available to adapt to a wide variety of locks from other manufacturers. All cylinders can be keyed into the same system, providing you the ability to operate all the locks at your facility using a single key, regardless of the lock manufacturer.
2S SERIES PUSH LOCKS FOR SLIDING DOORS
Specifications
Case– extruded brass.
Width– 1 1/2"
Thickness– 23/32"
Inside face plate– 2 3/4" x 7/8", hole spacing 2 3/16".
Detachable face plate– 1/16" x 1 1/8" x 2 3/4", hole spacing 2 3/16".
Strike– 2 3/4" x 1 1/8", 2 3/16" hole spacing.
Finish– 626 supplied unless otherwise specified.
FUNCTION CODE CHART
HOW TO ORDER 2S
3S SERIES SLIDING PANEL LOCKS
Specifications
Strike strap– stainless steel, 1/2" wide.
Locking housing– aluminum.
Finish– 627 aluminum only.
Operation– A stainless steel strap mounts permanently on the inner sliding panel. When panels are closed, the tongue of the strike strap extends beyond the edge of the outer panel. To lock panels, slide lock housing onto overlapping tongue and up against edge of outer panel. Lock by turn of key. Key is removable in locked position only.
SPECIFICATIONS
HOW TO ORDER 3S
SERVICE EQUIPMENT
5E254 Metal Punch and Die
This tool provides a quick method for cutting accurate 3⁄4" slabbed holes in metal cabinets in order to mount the 5E cylinder. Slabbed side prevents cylinder from turning or being forced with head wrench.
To order specify: 5ED254 punch and die.
5ED253 Thread Tap
Matches standard 24 thread on 5E series cylinder locks.
To order specify: 5ED253 thread tap
5ED261 Capping Block
The capping process for single shearline 5E cylinders requires the following:
5E slide caps: 5ECP6– 6 pin 5ECP7– 7 pin 5E
Cylinder: 5ED261 Capping Block 5ED262 Cap Depressor
5ED250–Combinating Kit (single shearline)
Service Equipment for 5E Cylinders (single shearline)
Best single shearline locks may be combinated to Grand Master, Master and/or any operating combinations in your BEST system. Utilizes the AD433 Key Combinator.
5ED250 Combinating Kit (single shearline)
Similar to standard CD431 kit for figure 8 cores, the single shearline kit provides a special 5ED261 capping block, springs (5ES1) and caps (5ECP)
To order specify:
5ED250 - 2 (for A2 system)
5ED250 - 3 (for A3 system)
5ED250 - 4 (for A4 system)
Pin Segments (included in kit)
Close tolerance segments assist in accurate combinating.
To order: Contact your local Best Representative.
Core Springs (included in kit)
This properly sized spring facilitates consistent action in all BEST figure 8 cores.
To order specify: 22S springs.
Core Caps (included in kit)
Barrels are securely sealed by applied core caps.
To order specify: 21C caps.
