Tubular Deadbolts

DEADBOLT FEATURES

1. No exposed mounting screws standard on 82T/83T double cylinder M function only (available as an option on 82T/83T K, L, and S function)

2. Full 1" stainless steel throw deadbolt

3. Free-turning, wrench-resistant, tapered cylinder ring

4. 82T/83T-solid extruded brass or bronze cylinder 72T/73T-solid cast zinc with brass or bronze shell

5. Stainless steel for strength and corrosion resistance

6. Simple installation; self-aligning and reversible

7. May be keyed into existing Best masterkeyed system

8. The original interchangeable core permits instant, economical re-lock

9. 82T/83T–American National Standard ANSI A156.5-1992 Auxiliary Locks, Grade 1 with 1CD Core and 8TS1 strike 72T/73T–American National Standard ANSI A156.5-1992 Auxiliary Locks, Grade 2

10. ADA turn lever (Not shown)

11. Deadbolt UL listed for use as auxiliary lock type on 3 hr. fire doors (GWXT). These locks also carry the C-UL mark which is now officially accepted in all of Canada, indicating compliance with appropriate Canadian standards and codes

 

Products protected by one or more of the following patents: 4,301,667 D290,085 4,843,852 Other Patents Pending

Top

 

 

SPECIFICATIONS

Deadbolt: 72T/73T– 1" throw, 5⁄8" x 7⁄8" bolt. Brass nickel plated, with concealed hardened steel freeturning pin. Housing fits 1" bore. 82T/83T- 1" throw, 5⁄8" x 7⁄8" solid stainless steel bolt. Housing fits 1" bore.

Faceplate: Brass or bronze base material. 72T/82T– 1" x 2 1⁄4", 73T/83T– 11⁄8" x 2 1⁄4"

Backset: 72T/82T– 2 3⁄8", 73T/83T– 2 3⁄4"

Trim: wrought brass or bronze cylinder rose or turn lever rose, 2 3⁄4" dia. to cover 2 1⁄8" bore. Machined brass or bronze cylinder ring.

Cylinders: 82T/83T– Machined from extruded brass or bronze bar stock. 72T/73T– Zinc casting with stamped brass or bronze shell

Strikes: 8TSTK– rectangular 1 1⁄8" x 2 3⁄4" (Std.) 8TS1– curved lip 1 1⁄4" x 4 7⁄8" (ANSI A115.2) 8TS4– curved lip 1 1⁄8" x 2 3⁄4" (ANSI A115.3) 8TS5– high security rectangular 1 1⁄4" x 4 7⁄8" (ANSI A115.1)

Door thickness: Fits 1 3⁄4" doors (standard) 72T/73T: fits doors - from 1 3⁄8" to 2 1/8" 82T/83T: fits doors - from 1 3⁄8" to 3"

Finishes: 72T/73T: 612–satin bronze, 626–satin chromium, 82T/83T: 605–bright brass, 606-satin brass, 611–bright bronze, 612–satin bronze, 613–dark oxidized satin, 625–bright chromium, 626–satin chromium

Top

 

 

HOW TO ORDER:

Top

 

 

FUNCTIONS

Top

 

 

82T/83T TUBE ASSEMBLIES

82TDB Deadbolt Tube Assembly

Bolt throw – 1"

Backset – 2 3⁄8"

Faceplate – brass or bronze 1" x 2 1⁄4". self-adjusting & reversible for either door hand.

Tube – steel. fits 1" diameter bore.

To order without trim – 82TDB and finish.

 

82TD5 Drive-in Bolt Tube Assembly

Bolt throw – 1"

Backset– 23⁄8"

Faceplate – brass or bronze, circular

Tube – steel. fits 1" diameter bore.

To order without trim – 82TD5 and finish.

 

83TDB Deadbolt Tube Assembly

Bolt throw – 1"

Backset – 2 3⁄4"

Faceplate – brass or bronze 1 1⁄8" x 2 1⁄4". self-adjusting & reversible for either door hand.

Tube – steel. fits 1" diameter bore.

To order without trim – 83TDB and finish.

 

83TD5 Drive-in Bolt Tube Assembly

Bolt throw – 1"

Backset – 2 3⁄4"

Faceplate – brass or bronze, circular.

Tube – steel. fits 1" diameter bore.

To order without trim – 83TD5 and 626 finish.

Top

 

 

PATENTED KEYING

BEST Peaks® – For advanced solutions in key control and security, BEST offers Peaks®, the most adaptable and cost effective patented keying system on the market. The patented mechanism ensures that cylinders and cores will only operate with the Peaks® keys, which are only available through authorized BEST distributors.

For BEST products, Peaks® offers the security and convenience of a patented solution for interchangeable core. Peaks® is also available to adapt to a wide variety of locks from other manufacturers. All cylinders can be keyed into the same system, providing you the ability to operate all the locks at your facility using a single key, regardless of the lock manufacturer.

Top

 

 

STRIKES

8TSTK Standard Strike

Dimensions– 11⁄8" x 2 3⁄4" (Supplied with box and screws).

To order with unit– STK.

To order without unit– 8TSTK and finish.

 

8TS4 Strike

Dimensions– 11⁄8" x 2 3⁄4" with curved lip. (Supplied with box and screws).

To order with unit– S4

To order without unit– 8TS4 and finish.

 

8TS1 Strike

Dimensions– 11⁄4" x 4 7⁄8" (ANSI 115.1) (Supplied with box and screws).

To order with unit– S1

To order without unit– 8TS1 and finish.

 

8TS5 High Security Strike

Dimensions– 11⁄4" x 4 7⁄8" (Supplied with box and long screws).

To order with unit– S5

To order without unit– 8TS5 and 630 finish ONLY.

Top

 

 

SERVICE EQUIPMENT

KD304A–BORING JIG KIT

The KD304A jig kit is made for boring cut-outs in wooden doors for Fed. Spec. 160 and 161 series cylindrical/ tubular locksets, doors 1 3⁄8" to 2 1⁄4" thick. The KD304A kit includes the boring jig (to drill wood doors for 2 3⁄8", 2 3⁄4", 3 3⁄4", and 5" backsets), adaptor for 3⁄8" drill chuck, KD309 2 1⁄8" bit, KD318 1" dia. x 9" bit, KD312 face plate marking chisel 1", KD315 face plate marking chisel 1 1⁄8", and the KD325 strike plate locating pin.

To order complete kit specify: KD304A Kit. All of the individual kit parts listed above may be ordered separately except for the adaptor chuck and jig.

 

KD312, KD315-FACE PLATE MARKING CHISELS

KD325-STRIKE PLATE LOCATING PIN

The KD312 face plate marking chisel locates the mortising for the face plate of Federal Spec 160 (1" x 2 1⁄4" ) cylindrical and tubular lockset. The KD315 faceplate marking chisel locates the mortising of the faceplate. Federal Spec 161 (1 1⁄8" x 2 1⁄4" ) cylindrical and tubular locksets. A strike plate locating pin KD325 is available for use in conjunction with Fed. Spec. 161 cylindrical and tubular locksets.

To order designate:

KD312 face plate marking chisel (1" ).

KD315 face plate marking chisel (1 1⁄8" ).

KD325 strike plate locating pin.

Top

Tubular Deadbolts

Download this Catalog
here