Skip to main content


Miscellaneous Hinges


Miscellaneous Hinges are available for diverse applications and in many styles. Our series of hinges include Heavy weight 2 knuckle; Shock arrestor; Olive Knuckle Hinges; Heavy Guide Plain Bearing full surface, and more.


Miscellaneous Hinges
Miscellaneous Hinges
Miscellaneous Hinges
Miscellaneous Hinges
Miscellaneous Hinges


Heavyweight 2 Knuckle Full Mortise Concealed Bearing

CB0701– (ANSI A8111) – Steel – polished and plated or phospahated and prime coated for painting 
CB0761– (32) – (ANSI A5111) – Stainless Steel – highly polished 
CB0761– (32D) – (ANSI A5111) – Stainless Steel – satin finish 

  • For heavy doors, or doors where high frequency is expected 
  • Concealed bearing, takes both vertical and lateral loads 
  • Secure: Door cannot be lifted off when in closed position 
  • All hinges have template screw holes location for use on either wood or hollow metal doors and frames 
  • Loose joint – specify hand 


225R – Steel – phosphated and prime coated for painting or polished and plated 

  • Protects against loosened screws and bent hinge leaves 
  • For doors 1 3/4” (44 mm) thick with either standard or heavy weight hinges 4 1/2” (114 mm) wide 
  • Designed to fit doors inset 1/8” (3.2 mm); for flush applications, place a 1/8” (3.2 mm) shim underneath the frame plate 
  • Brass pintle and large screws resist maximum shock loads 
  • Surface applied 
  • For square or beveled edge doors 


  • For interior or exterior doors that demand hinges with the smart clean look 
  • Can be used on hollow metal or wood doors and frames 
  • Ideal for use in offices, restaurants, recreational building and residences 
  • Designed in particular for 1 3/8” (35 mm) to 1 3/4” (44 mm) average frequency doors 
  • Equipped with an anti-friction bearing assembly 
  • Template hole locations 
  • Handed – when ordering specify right or left hand 
  • Edge of hinge closest to the barrel should be 1/4” (6.4 mm) from face of door, regardless of door thickness 


  • No hole construction featuring heavy gauge steel and fast spun pins 
  • Not swaged for full surface weld on applications 
  • Hinge widths are approximately 1/8 ̋ less than nominal sizes shown 
  • All sizes have five knuckles 
  • Plain steel 
  • Bulk packed 


  • For low frequency residential double acting wood doors 1 3/8” to 1 3/4” thick weighing up to 75 lbs 
  • Holds door open at approximately a 90º angle on either side of opening 
  • Ball bearing located at the top of the hinge carries the weight of door and takes the thrust of spring 
  • Hardened steel roller, working with the cam, ensures easy and noiseless operation 
  • Spring tension is fully adjustable 
  • Set consists of top pivot, horizontal floor hinge, decorative plates, fasteners and installation instructions 


The BEST solutions for your industry

Where it Works

Learning & Higher Education

Protect fingers and minimize injuries. Despite time spent checking school doors, it only takes one to put students, staff and property at risk. New or retrofit with a quality BEST hinge that will last.


New or retrofit with a quality BEST hinges. Save time and money by retrofitting existing doors and frames. No need to start over when installing BEST series hinges.


New or retrofit with a quality BEST hinges with special tips specifically designed for hospitals, and healthcare facilities.

Retail & Commercial

There’s a hinge to suit virtually every application. BEST Hinges fit doors better and last longer. Available many styles and models for high-traffic entryways.

Find A Dealer

Connect with a Local Dealer

With dealers in every major city and region across the United States, you have immediate access to all BEST products.

Find a Dealer

© 2024 All rights reserved. | Privacy Policy | Disclaimer